oric:hardware:v23_modem
This modem was designed mainly to allow access to the Videotex (Prestel/Minitel/Btx) system. Operated at 1200 baud half duplex or 1200/75 full duplex. It goes in the expansion port, so if you have a disk system you need to connect a socket on the ribbon cable so that you can have both attached.
oric/hardware/v23_modem.txt · Last modified: 2015/06/21 16:51 by polluks
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
